VAG DPF MOD APK 3.26.11 (Patched)

Home » Android » Application » Auto & Vehicles » VAG DPF MOD APK 3.26.11 (Patched)





VAG DPF MOD APK 3.26.11 (Patched)

ATTENTION!!

This app works only with VAG cars (Audi Volkswagen Seat Skoda) that are equipped with engines listed below; for diesel engines not listed is not guaranteed the full compatibility, so if you anyway buy the app, consider that some or all functions couldn’t work correctly.
This app doesn’t work with other brand’s car due to a different diagnostic protocol.

VAG DPF forum:

https://www.applagapp.com/forum/

VAG DPF F.A.Q.:

http://www.applagapp.com/forum/viewtopic.php?f=9&t=319

VAG DPF shows you the most important data related to the DPF particulate filter and its regeneration phases using an ELM327 Bluetooth/WIFI adapter. With this app you can know if the filter is actually in regeneration process, if a regeneration is waiting to complete, how many km have you traveled since last regeneration, etc. This app doesn’t use standard OBD2 commands as almost all other apps, it uses directly CAN commands specific of car model and this is the reason why it doesn’t work with every car; due to the use of CAN commands, the app needs al least a decent ELM327 adapter (see note below); some users reports correct app working with a 10-15 euro adapter.

IMPORTANT!! I suggest to try the app “VAG DPF Free” to check the correct functionality of your adapter and your Android before to buy the full app.

Supported engines:

DDETA, CRBC, CFHD,CUNA, CFFB, CFWA, CLHA, CXXB, CAYC (partially working on Passat 3C MY10), CAHA (beta, requires verification), CXHA

Engines tested successfully by users:

CFGB(*), CFGC, CJCA, CRMB, CUPA, CUSA, CXFA, CAYB, CAYD, CRLB, CUTA, CFHC, CAGA(*), CSHA, CJCD, DFSB, CLAB, DFLA, DCXA, CFCA, CGLC, CFJB, CFHA, CRUA, DDYA, DFFA, CRKB, DCYA, DFCA, CUUB, CGLB, CUAA, CUSB, CAPA(*), DFGA, DFSF, DFHA, CNHA, DGTE(*), CCWA, DGDA, DLUB, CJCB, DGTD, CDUD, CSUD, DAUA, DJGA, CXXA, DFEA, DBGC, CAYA
(*) = partial support or depending on SW version
IMPORTANT some of the engines above may be incompatible, it depends on the engine software version, so use the VAG DPF FREE app to check your engine before buy!!!!

Core functions:

Display of 12 DPF filter parameters like:

  • soot mass accumulation in the filter, regeneration duration, km traveled and time passed since last regeneration, EGR valve
  • closing, exhaust gas temperatures of inlet and outlet of DPF (Attention: data shown may vary depending of the engine type due to the presence of the parameters into the engine ecu)
  • Manual or automatic parameters update
  • Display, for all the parameters, of the previous value and the difference between the actual and the previous value (only for automatic update delays different from 0 seconds)
  • Ability to exclude one or more parameter to increase the reading speed
  • Display of the filter filling percentage before reaching of the filling limit that starts the execution of a field regeneration (standard regeneration controlled by the engine ecu)
  • Graphical display, using a progress bar, of the filling percentage value before starting a field or a service regeneration

Graphical display of the filter status:

red filter for the regeneration phase (passive, field or service) of grey filter with different back internal areas depending on the filling percentage value

Display of extra data:

adapter communication error counter, filter filling rating in µg/min, update time of all the 12 parameters, automatic update delay actually selected in options menu
Notification bar icon to show an active connection and the auto-update process running

Some words about ELM327 adapters:

OBDLink LX:

recommended, expensive but fast and reliable (I used it for development of this app)

Carista:

recommended, affordable price but very reliable (I use it for debug and daily scans)

China cloned adapter:

not recommended, unreliable, you can randomly find decent adapters or fake adapters with unpredictable results


Category: Auto & Vehicles
Released:
2016-03-08
Get it on:
google play
Developer: Daaren Fonloil
Updated:
October 6, 2022
Requirements:
4.1 and up
Latest Version: 3.26.11
Content Rating:
Everyone
Total installs:
10,000+

3.8 415 total
5
0
4
5
3
4
2
271
1
135

WHAT"S NEW

3.26.11
- CHFA engine moved from group 5 to the new group 19 (thanks Georg)
- new split coloring method for filter image following input and output gas temperatures
- bug fixing

3.25.10
- solved a connection bug in case of resuming

3.24.10
- removed the custom font scale for options menu


Leave a Comment


Login
Loading...
Sign Up

New membership are not allowed.

Loading...